INSTRUCTION MANUAL: Vintage Buds
TOUCH SENSOR FUNCTIONS
1. Volume Up: Tap Right Earbud Function Button 1x
2. Volume Down: Tap Left Earbud Function Button 1x
3. Pause: Tap Either Function Button 2x
4. Next Track: Tap Right Earbud Function Button 3x
5. Previous Track: Tap Left Earbud Function Button 3x
6. Voice Command (Google/Siri): Tap Either Earbud Function Button 4x
HOW TO CHARGE CHARGING CASE
1. Connect the lightning cable to lightning port on the charging case.
2. Plug the USB connnector of the cable into a USB Power source
3. The indicator light will show RED while the charging case is
charging, Depending on the power delivered to the charging case, the
charging case will take approximately 2 hours or more to completely charge.
4. The indicator light will go solid blue, then blink, then turn off when the
case is fully charged.
TO CHARGE EARPHONES
1. Put the earphones in the charging case correctly, charging case will start to charging automatically
2. The indicator light on the earphones will turn RED while charging
3. The indicator light on the earphones will turn OFF when fully charged
POWER ON
Press and hold the multi-function key on BOTH L and R earphone for 3 seconds simultaneously, release when the BLUE light is on with a voice prompt:
“POWER ON”
PAIRING
1. When power on, L and R earphones will connect each other automatically and sound with a voice prompt: “ CONNECTED” , and the indicator lights of R
earphone will flash blue and red with a voice prompt: “PAIRING”, While blue
indicator light of L earphone flash slowly
2. Enable the bluetooth pairing mode on your phone device. Tap on “Air plus” to connect. Right earphone will response with a voice prompt:
“CONNECTED”and blue light flash when connected successfully.
3. Earphones will response with a voice prompt:“DISCONNECTED” when bluetooth signal is cut off, and shutdown 5mins later automatically
4. When power on,the earphones will connect the last paired mobile
automatically. If not, pls repeat step 2.
POWER OFF
1. TWS mode (Due-ear)Press and hold the multi-function key on either earphone for3 seconds. Release when the red indicator light is on with a voice prompt:“POWER OFF
2. Independent use mode (Single Ear, L or R)Press and hold the multi-function key on the used earphone for 3 seconds. Release when the red indicatorlight is on with a voice prompt:“POWER OFF”
3. Put the earphones in the charging case correctly, will auto shutdown * The battery status of earphones is visible on connected devices, when it’s
running out of power, the earphones will remind you with a voice prompt:
“LOW BATTERY, PLEASE CHARGE”, pls recharging in time
POWER OFF
To Answer A Call
Press the multi-function key of the right earphone one short
To End A Call
Press the multi-function key of the right earphone one short. Voice response tone“call ended”
To Play and Pause Music
Press the multi-function key on either earphone once
To Play the next song
Press and hold the multi-function key on either earphone for 2s